If your GM or Dodge Dana 70 rear axle has drum brakes and you need to convert them to disks, this conversion kit is just what you need. It includes a one-piece 3/8 thick caliper bracket, copper nickel axle hard lines and flex lines for easy installation.
🎯Suggested article: Closed Knuckle Dana 44 Disc Brake Conversion
Brackets
Brackets are an integral component of any disc brake conversion, and the best ones offer practicality as well as aesthetic appeal. We carry several in stock and ready to be shipped directly to you. Motobilt MB4022 14 bolt full float rear disc brake brackets are CNC laser cut from 3/8″ thick steel and feature multiple mounting holes to accommodate various rotor combinations. These impressive pieces will appeal to a wide range of enthusiasts, including 60/70 racers as well as those tackling Dana 300 or 350 engines. Drill the necessary holes into your rear axle housing and attach 3M VHB tape to the underside of the mounts; it’s a simple process. Best of all? These kits are budget friendly – so you can finish your next project for much less than buying off-the-shelf solutions would cost!
Calipers
Lugnut4x4’s Dana 70 disc brake conversion kits are the simplest and most economical way to upgrade from drum brakes to discs. Simply remove your heavy drum brakes and install a single piston, single caliper design for increased stopping power. These kits offer you an effortless transition from drum brakes to discs at an unbeatable price point!
Calipers are the cornerstone of your new braking system. Our kits contain only top-of-the-line calipers, providing you with unbeatable stopping power.
Our kits feature large single piston calipers that fit most 3/4 ton Chevy rotors or calipers. If extra holding power is needed, our dual caliper option can also be provided. Each kit includes calipers, brackets, brake pads and assembly hardware; additionally we provide a proportioning valve so you can fine-tune your front/rear brake bias for improved braking performance and heat control as well as an even front-rear setup.
🚀Recommended article: Dana 44 8 Lug Front Disc Brake Conversion
Brake Lines
Converting from drum brakes to discs is simpler and cheaper than you might think. Our disc brake conversion kits include everything necessary for conversion: copper nickel axle hard lines, a one piece 3/8 thick caliper bracket, flex lines, and an accurate rotor with the proper lug diameter for your original wheel studs.
Our disc brake kits are an ideal choice for upgrading your Dana 70 or adding disc brakes to an old rust bucket that needs new life. We only use top quality parts and our kits come pre-assembled for fast installation.
Our braking systems feature brake line kits custom engineered for your vehicle and CNC manufactured for precise fitment. These replacement lines replace your vehicle’s original brake lines and are suitable for high pressure applications. Furthermore, we carry a selection of accessories like brake valves and hoses.
Hardware
Disc brake conversion kits typically include all of the hardware necessary to install front disc brakes on an axle, such as brake rotors, calipers, brackets, flex lines, pads and bearings. Together these items create the optimal level of braking performance, feel and aesthetics for your car or truck.
👀Look at this: Dana 44 Rear Disc Brake Conversion For Your Jeep Wrangler (TJ)
A Dana 70 disc brake conversion kit is a weld on kit that uses spacers to clear 16″ wheels for easy welding or rewelding if necessary. This 3/8″ thick steel bracket and weld flange set is CNC laser cut for perfect fit! Additionally, this set comes with 1/2″ x 20 grade 8 bolts and nuts made of high alloy with loc washers for extra hold and security. Whether you’re building an off road pickup or adding disc brakes to an axle in your custom vehicle – this kit has everything you need!